- Grease fire incidents in Firefighting Sim center on fast flame suppression inside structure interiors
- Bring a hose and breathing mask: smoke fills the kitchen area quickly and blocks visibility
- Search the structure before leaving; a response is not complete until all objectives are handled
- Divide tasks in multiplayer: one player suppresses while others check rooms and rescue targets
- Confirm the objective tracker reads complete before returning to your vehicle
Grease Fire Basics in Firefighting Sim
A grease fire in Firefighting Sim is a structure-fire variant where flames concentrate around a kitchen or cooking area and can spread rapidly to surrounding rooms. Like other calls around Oak Ridge, the objective is rarely just "put out the visible flames" — the game tracks suppression, search, and rescue targets, and incomplete objectives reduce your call evaluation.
These incidents reward the same fundamentals that apply to residential and apartment fires: read the call type before dispatch, pick a vehicle that matches the task, and carry the right equipment before you leave the apparatus.
Flames concentrated in one spot can tempt you to spray and leave. Firefighting Sim often adds secondary objectives — trapped civilians, remaining hot spots, or room searches — that only appear after initial suppression. Always check the objective tracker before departing.
Grease Fire vs Other Structure Calls
| Incident Type | Fire Location | Main Risk | Key Equipment | Search Priority |
|---|---|---|---|---|
| Grease / Kitchen Fire | Cooking area, interior | Rapid interior spread, dense smoke | Hose, breathing mask, axe | High — check nearby rooms |
| Residential Fire | Whole house | Blocked routes, smoke | Hose, mask, axe, ladder | High — full structure |
| Apartment Fire | One unit, multi-floor | Spread between units | Hose, mask, ladder | High — multiple rooms |
| Office Fire | Work areas, corridors | Obstructed routes | Hose, mask, axe | Medium — room by room |
| Vehicle Fire | Exterior, single target | Restricted approach angles | Hose, mask | Low — check surroundings |
Vehicle and Equipment Selection
Choose your apparatus based on the objective, not on vehicle rarity. For grease fires inside homes or businesses, a standard Fire Engine covers general suppression, while a Rescue Ambulance becomes the better pick when the call shifts toward injured civilians.
Fire Engine
- Default choice for structure and grease fires
- General suppression capability
- Flexible first-response role
Rescue Ambulance
- Best when objectives focus on injured civilians
- Supports medical and rescue tasks
- Pairs well with an engine in teams
Command Vehicle
- Useful for multi-stage emergencies
- Helps coordinate several responders
- Not a suppression substitute
Recommended Loadout
| Equipment | Category | Why It Matters for Grease Fires |
|---|---|---|
| Hose | Suppression | Primary tool; extinguishes active flames and edges of the burn area |
| Breathing Mask | Smoke Protection | Kitchens produce dense smoke; maintains safe interior movement |
| Axe | Access | Opens blocked doors or interior routes cut off by fire spread |
| Ladder | Elevated Access | Only needed when objectives reach upper floors or windows |
| K9 Partner | Search Support | Useful if the call includes missing-person objectives |
If the incident is indoors, take the hose and mask every time. Add the axe when the layout has enclosed rooms or unclear access routes, and skip the ladder unless the objective marker sits above ground level.
Step-by-Step Grease Fire Response
Follow this sequence to complete the call cleanly. The loop mirrors the core Firefighting Sim gameplay cycle: dispatch, respond, suppress, search, and confirm completion.
Read the Dispatch Prompt
Check the incident description at the station. Confirm whether the call is fire suppression, rescue, or medical so your vehicle and equipment match the assignment before you leave.
Respond and Position
Drive to the marked location and park where you do not block other responders. Exit the vehicle and scan the scene for flames, victims, hazards, and interaction prompts.
Suppress the Active Flames
Equip the hose and aim at the visible fire first. Sweep nearby sections and the edges of the incident area afterward so missed hot spots do not reignite the call.
Search the Structure
Move room by room rather than randomly. Use the breathing mask in dense smoke, and deploy the K9 partner if the objective includes a missing person.
Rescue and Complete Objectives
Approach marked civilians and use the displayed interaction input. Keep watching the objective tracker — new tasks can appear after earlier ones are marked complete.
Confirm and Review
Verify the incident is marked complete, check your score or evaluation, and use the feedback to improve positioning, equipment choice, and teamwork on the next call.
Consistent, complete responses — full suppression plus a searched structure and handled rescue targets — build experience faster toward the Firefighter, Officer, and Fire Chief ranks than rushed partial calls.
Common Mistakes and How to Avoid Them
Grease fire calls fail most often because of preventable errors. Each mistake below maps directly to a lower call evaluation.
| Mistake | Consequence | Fix |
|---|---|---|
| Spraying only visible flames | Missed hot spots, incomplete objective | Sweep edges and nearby sections after suppression |
| Entering without a mask | Blocked visibility, slower movement | Equip the breathing mask before entering smoke |
| Wrong vehicle for the call | Missing rescue or medical capability | Match the apparatus to the dispatch description |
| Leaving before the tracker clears | Unfinished objectives, weaker evaluation | Confirm every objective is marked complete |
| Crowding one task with teammates | Obstructed angles, duplicated work | Split roles: suppression, search, rescue |
Playing alone makes search objectives the bottleneck. Clear flames from the route first, then search methodically room by room so you never have to backtrack through active fire.
Grease Fire Response Checklist
Run through this list every time a kitchen or grease-related call comes in on Oak Ridge.
Before You Leave the Scene:
- All visible flames and edge hot spots extinguished
- Breathing mask equipped during interior search
- Every room searched, not just the kitchen
- All marked civilians rescued or assisted
- Objective tracker shows the incident complete
FAQ
Q: What is a grease fire call in Firefighting Sim?
It is a structure-fire variant where flames concentrate around a cooking or kitchen area and can spread to nearby rooms. The call combines suppression with room searches and possible rescue targets, so completing only the visible flames usually leaves objectives unfinished.
Q: Which vehicle should I take to a grease fire in Firefighting Sim?
A standard Fire Engine covers most grease fires because the primary task is suppression. Switch to a Rescue Ambulance or bring one alongside when the dispatch description emphasizes injured civilians or rescue objectives.
Q: Do I need a ladder for grease fires?
Usually not. Grease fires concentrate at interior cooking areas on ground level. Only take a ladder when the objective markers sit above ground level, such as upper-floor windows or platforms in apartment-style buildings.
Q: Why does my call evaluation come out low even after the fire is out?
Firefighting Sim evaluates the full response, not just suppression. Missing room searches, unrescued civilians, and overlooked hot spots all reduce the result. Search the entire structure and confirm the objective tracker is complete before returning to your vehicle.